PHONO PREAMPLIFIER
The phono preamplifier is suitable for moving magnet and high-output moving coil cartridges

Input Impedance

100 Ω (MC), 47 kΩ (MM)

Input Capacitance

270 pF (MM)

Maximum Input (at 1 kHz for <0.1% THD 20 Hz - 20 kHz)

3.6 mV (MC), 37.7 mV (MM)

Gain (default at 1 kHz, user adjustable ± 20 dB)

55 dB (MC), 35 dB (MM)

RIAA Response

± 0.1 dB (20 Hz to 20 kHz)

THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output)

0.008% (MC), 0.005% (MM)

S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output)

82 dB (MC), 96 dB (MM)

PREAMPLIFIER

Frequency Response

digital-in, 192 kHz

10 Hz - 50 kHz (+0.00, -0.50 dB)

digital-in, 96 kHz

10 Hz - 45 kHz (+0.00, -0.50 dB)

digital-in, 44.1 kHz

10 Hz - 20 kHz (+0.00, -0.03 dB)

analog-in, DSP mode

10 Hz - 40 kHz (+0.02, -0.20 dB)

analog-in, direct mode

10 Hz - 80 kHz (+0.00, -0.10 dB)

THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output)

digital-in, 44.1 kHz, 0 dBFS

0.0008%

analog-in, DSP mode, 1 Vrms input

0.001%

analog-in, direct mode, 1 Vrms input

0.0020%

SNR (at 1 kHz, IEC-A, 2 Vrms output)

digital-in, 44.1 kHz, 0 dBFS

112 dB

analog-in, DSP mode, 2 Vrms input

110 dB

analog-in, direct mode, 2 Vrms input

120 dB

Maximum Output (<0.1% THD)

2.2 Vrms except analog-direct 3.3 Vrms

XLR Configuration

Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted

POWER AMPLIFIER

THD (100 W)

0.002% (1 kHz), 0.015% (20 kHz)

IMD (100 W)

ITU-R (19 kHz + 20 kHz)

0.0007%

SMPTE (60 Hz + 7 kHz)

0.005%

SNR (IEC-A, ref. 200 W)

114 dB

Frequency Response (20 Hz - 20 kHz)

± 0.1 dB

Power Bandwidth (-3 dB at 200 W into 8 ohms)

80 kHz

Slew Rate

30 V/μs

Damping Factor (20 Hz - 1 kHz)

330

Channel Separation

101 dB (100 Hz), 61 dB (10 kHz)

POWER REQUIREMENT

120 V version:

In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.

220-240 V version:

In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.

POWER CONSUMPTION

Standby

0.38 W (120V), 0.45 W (240V)

Standby + Network

1.1 W (120V), 1.2 W (240V)

Idle

40 W

Typical Use

250 W

High Output

500 W

DIMENSIONS

Height

6-3/4” (17.2 cm)

Width

17” (43.2 cm)

Depth (not including power cord)

17-1/2” (44.5 cm)

Weight (unpacked)

40 lb (18 kg)